The EPS3I Battery Pack is equipped with a LED low battery indicator located on the battery’s front panel. To check battery level, press and hold the button. Five red LEDs glow: battery charge is maximum. One red LED glows: battery charge is minimum.
Increased working time
One Battery Pack EPS3I allows to increase working time of thermal imaging and digital devices in comparison with time of normal battery packs.
External Power Supply EPS3I has a LED charge indicator and can be activated by pushing the button on the front side of the device.
Waterproof plastic body
EPS3I has a hard waterproof plastic body (class IPX5) that prevents all inner parts (electronics, batteries) from climatic and mechanic impacts.
External Power Supplies EPS3I has a mount Weaver and can be installed on the body of different devices that possess an applicable rail.
The EPS3I is supplied with an extension cable which allows it to be stored in any suitable place, in a pocket, for example, when using a NV device in freezing weather and to increase operating time up to total discharge.
Battery Type Li-Ion
Rated capacity (Ampere-hour rating), 2.4 Ah
Voltage at end of discharge, 8.9V
Charging voltage, 12.6 V
Full charge time, 4 hours
Full discharge time (I=250 мА), 9 hours
Physical & operational characteristics
Degree of protection (acc. to IEC60529), IP Rating IPX5
Operation temperature range, charge / discharge, , under 60±25%R.H 0 ...+45 / -20 ... +60 ͦ C
|Dealer Information||PLEASE CONTACT US FOR YOUR NEAREST RETAILER